Free US shipping on eligible AST orders $40+
Final sale. Check the fabric and application guide before pressing.
Sit, scratch, layback, backspin and camel make up this design for skaters who spend their sessions going around and around. A great little list for spin practice days.
- Size: 6" × 7"
- Type: Plastisol heat transfer
- Apply with: Iron or heat press at 350°F, no steam
- Works on: 100% cotton or cotton blends (up to 50% poly)
- Care: Wash cold inside-out; tumble dry low or hang dry
Make a skating shirt in a color and fit you already like. Our plastisol heat transfers are ready to apply to compatible cotton and cotton-blend tees, hoodies and sweatshirts with a household iron or heat press. You don't need a cutting machine. Read the fabric and pressing instructions before starting, especially if you're using a garment you can't replace.
Returns and exchanges
Heat transfers are final sale, including after attempted application. Please read the fabric and pressing instructions before you start.
Heat transfer disclaimer
Heat transfers require proper application using a heat press or correctly calibrated iron. Because application conditions vary and results depend on technique, we cannot offer refunds for application errors. Please review the instructions carefully before use.
Ways to save at AST
They come off in your cart, no code needed.
Spins Plastisol Heat Transfer
$5.00 · White
Reviews from skaters
- HBHeather B. S.Verified BuyerReviewingSKATER Plastisol Heat TransferI recommend this productRated 5 out of 5 starsGreat transfer!
I haven't done much iron on transferring so was a little nervous to apply the transfer, but it turned out great! Very pleased with my purchase.
Choose the right garment
Best results are on 100% cotton or cotton blends with no more than 50% polyester. Avoid nylon, 100% polyester, most skating leggings and other performance fabrics. Some fabrics can be damaged by high heat. Check the garment's care label and confirm it can tolerate the transfer's required application temperature before pressing.
How to apply
Follow the application sheet included with your transfer and our full how-to guide. For the currently documented transfer method: pre-press your garment for 2 to 3 seconds to remove wrinkles and moisture. Set a suitable iron to approximately 350°F with steam off. Place the design face down, cover as directed and apply firm, even pressure for 15 to 20 seconds; heat presses use 10 to 15 seconds at medium pressure. Let it cool briefly, peel the backing carefully while warm and finish with another covered 5 to 10 second press. Heat and pressure vary by equipment, so read the included instructions before applying.
Care after pressing
Wait 24 hours before washing. Wash inside out in cold water and hang to dry or tumble dry on low. Don't iron directly over the design. If you need to press the garment later, protect the print with parchment paper.
Before you press
Will a household iron work?
Yes, for compatible fabric and with the correct heat and pressure. Turn steam off and use a hard, flat surface. A heat press gives more consistent pressure if you have access to one.
Can I mix designs for a discount?
Yes, eligible heat transfers count together in the current mix-and-match offer. The discount is shown in your cart after you reach the required quantity.
What does a transfer look like when it arrives?
Each one arrives printed in reverse on white transfer paper, ready to press, with the application instructions. The design looks backwards until you press it face down, and then it reads the right way on your shirt.
Can I use it on skating leggings?
We don't recommend it. Check the leggings' fabric content and care label first. Do not apply a transfer unless the garment can tolerate the required heat and the transfer instructions confirm that its fabric is compatible. A cotton tee or sweatshirt is a better surface.
How do I wash it?
Wait 24 hours before the first wash. After that, wash it inside out in cold water and tumble dry on low or hang it to dry. Don't iron directly on the design; put parchment paper over it if the garment needs ironing.
What if part of it doesn't stick?
Most problems come down to heat, pressure or timing. If the edges didn't stick, check the iron is at 350°F with the steam off, then cover the design and press again with firm, even pressure. If a transfer still won't behave, email a photo to contact@adultsskatetoo.com. Results depend on how a transfer is applied, so we can't refund application errors.
Can I sell garments made with these transfers?
No. These transfers are sold for personal projects. They aren't intended for making garments to sell. If you have a commercial-use question, please contact us before using the design.
Can I return a transfer if I can't apply it?
Heat transfers are final sale. We can't credit a transfer after application or an attempted application, because the result depends on fabric, temperature, pressure and technique. Contact us before pressing if you're unsure.
Questions before you order?
Email contact@adultsskatetoo.com and we'll help you choose.
How to apply heat transfers to skating apparel
Read the guideYou might also like
Toepick Plastisol Heat Transfer
Irons onto cotton
Rated 5.0 out of 5 stars1 ReviewRegular price $5.00Unit priceThis option is unavailable
I Am the Skater Plastisol Heat Transfer
Irons onto cotton
Rated 5.0 out of 5 stars1 ReviewRegular price $5.00Unit priceThis option is unavailable
AST Ombre Blade Plastisol Heat Transfer
Irons onto cotton
Rated 5.0 out of 5 stars1 ReviewRegular price $5.00Unit priceThis option is unavailable
World's Okayest Skater Plastisol Heat Transfer
Irons onto cotton
Rated 5.0 out of 5 stars1 ReviewRegular price $5.00Unit priceThis option is unavailable
Languages Plastisol Heat Transfer
Irons onto cotton
Rated 5.0 out of 5 stars1 ReviewRegular price $5.00Unit priceThis option is unavailable
Spotted in the wild
Seeing our stuff out at the rink never gets old, so tag @adultsskatetoo and we might share yours.
