For those who skate on their own terms.

This premium plastisol heat transfer lets you customize your own apparel with our "Single Double Triple Quad" design. Perfect for adding personality to practice wear, team gear, or everyday favorites.

What's Included

• One ready-to-apply plastisol heat transfer
• Professional-quality, durable ink
• Detailed application instructions

Application Instructions

You'll need: Household iron or heat press, hard flat surface, parchment paper or Teflon sheet

Temperature: 350°F (medium-high setting on household iron)

Steps:

1. Preheat iron to 350°F with NO steam. For heat press, set to 350°F.
2. Pre-press garment for 2-3 seconds to remove moisture and wrinkles.
3. Place transfer face-down on fabric in desired position.
4. Cover with parchment paper or Teflon sheet.
5. Iron: Apply firm, even pressure for 15-20 seconds using circular motion. Heat press: Apply medium pressure for 10-15 seconds.
6. Let cool for 10-15 seconds, then peel backing slowly while still warm (warm peel).
7. Re-cover with parchment paper and press for 5-10 seconds for best durability.

Best Results

• Works best on 100% cotton or cotton blends (up to 50% poly)
• Not recommended for nylon, 100% polyester, or performance fabrics
• Wash inside-out in cold water, tumble dry low or hang dry
• Do not iron directly on transfer; use parchment paper if needed
• Wait 24 hours before first wash for best adhesion

For Personal Use Only: These transfers are for your personal projects only—no commercial use or resale, please. All designs © Adults Skate Too LLC.