Rockers & Counters & Brackets & Three Turns Plastisol Heat Transfer

The essential turns, all in one design.

This premium plastisol heat transfer lets you customize your own apparel with our technical "Rockers & Counters & Brackets & Three Turns" design. Perfect for adding personality to practice wear, team gear, or everyday favorites.

What's Included

• One ready-to-apply plastisol heat transfer
• Professional-quality, durable ink
• Detailed application instructions

Application Instructions

You'll need: Household iron or heat press, hard flat surface, parchment paper or Teflon sheet

Temperature: 350°F (medium-high setting on household iron)

Steps:

1. Preheat iron to 350°F with NO steam. For heat press, set to 350°F.
2. Pre-press garment for 2-3 seconds to remove moisture and wrinkles.
3. Place transfer face-down on fabric in desired position.
4. Cover with parchment paper or Teflon sheet.
5. Iron: Apply firm, even pressure for 15-20 seconds using circular motion. Heat press: Apply medium pressure for 10-15 seconds.
6. Let cool for 10-15 seconds, then peel backing slowly while still warm (warm peel).
7. Re-cover with parchment paper and press for 5-10 seconds for best durability.

Best Results

• Works best on 100% cotton or cotton blends (up to 50% poly)
• Not recommended for nylon, 100% polyester, or performance fabrics
• Wash inside-out in cold water, tumble dry low or hang dry
• Do not iron directly on transfer; use parchment paper if needed
• Wait 24 hours before first wash for best adhesion

For Personal Use Only: These transfers are for your personal projects only—no commercial use or resale, please. All designs © Adults Skate Too LLC.